Operational in a new extension of the Scotland-based distillery, the 2-tonne SWL (Safe Operating Load) lifts and lowers sealed lids and baskets from boxes containing the raw materials used in gin production.
Among the difficult situations of this difficult commission was the limitation of the total height of the new construction due to local planning laws. At the same time, only a limited height should be available for lifting operations above ships. Therefore, Hoist & Winch’s specifications of Italkrane YY series electric chain hoists, which feature a low headroom design, were very important for the application. The ATEX specification of hoists is mandatory due to the fumes and fumes produced in the manufacture of alcohol-based products.
Italkrane’s YY series electric chain hoists feature an Ex d electric housing to prevent any explosion and prevent flames, sparks and hot gases from escaping. Non-sparking functions are available for all parts subject to sliding friction, in addition to brass carriage wheels. Also included are a non-sparking load hook, a brass anti-tip device, and a polycarbonate pendant that offers explosion coverage up to Zone 1 II B T4 classification.
The power source for each lifting unit is produced through a complete cable tray formula with sliding carriages and arms attached to the most sensitive flange of the hoist beam. Each lift unit is also supplied with an Italkrane heavy-duty gear up/down restriction system. Transfer friction clutch overload covering device and friction type.
Due to the critical nature of the task and the threat of explosion at the high-risk site, it was evident that very strict elaboration plans and close monitoring of painting practices would be required at all times. In addition, the paintings at the site were themed. to Design and Construction Management (HOM) regulations, supported by the requirement that all on-site engineers have a valid NCGSC Safety Passport/CSCS Certification of Competence.
The installation took place over seven days, with a qualified electrical installation engineer from Hoist.
Following the issuance of an in-depth examination of LOLER (Regulators of Lifting Equipment and Lifting Operations) for all installation work, Hoist
While the optimal solution for this giant distillery, Italkrane’s ATEX certified electric chain hoists are also suitable for many other programs requiring lifting operations in hazardous environments. Furthermore, Hoist